Sub Bottom Profilers
Innomar Essential
Innomar Essential
Innomar Essential
The "Innomar essential" SBP model is intended to be used on small boats and uncrewed surface vehicles (USV / ASV). The high ping rate, a small footprint and the possibility of transmitting sound pulses over a wide frequency range ensure sub-bottom data with excellent resolution and very good sediment penetration.
Electronic beam stabilization across (roll) or along track (pitch) is used to compensate for wave-induced vehicle movements.
A user-friendly Windows data acquisition and system control software (SESWIN) is used for remote (Ethernet) operation. The "Innomar essential" model acquires full-waveform data that can be processed with any seismic software (SEG-Y format). Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Innomar Compact
Innomar Essential
Innomar Essential
The "Innomar compact" model was designed for inshore surveys in shallow-water down to 400 metres water depth, but can also be used in coastal areas. Because of its small size and weight this system is convenient even on small boats. Controlled via Ethernet using any Windows based PC or laptop it is a user friendly and affordable design, too.
The "Innomar compact" model acquires full-waveform data that can be processed with any seismic software (SEG-Y format). Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Innomar Standard
Innomar Standard
Innomar Standard
From the wide range of Innomar parametric sub-bottom profilers the "Innomar standard" model is the most versatile one: it is small enough to be used on small boats for inshore surveys but also powerful enough to be applicable for offshore surveys down to 500 meters water depth.
The high ping rate, small footprint and the possibility of transmitting sound pulses over a wide frequency range ensure sub-seafloor data with excellent resolution and very good sediment penetration. Electronic beam stabilization will give good results under bad weather conditions, too. A user-friendly data acquisition and system control software (SESWIN) provides the possibility for network remote operation as well as remote data visualization. The "Innomar standard" model acquires full-waveform data that can be processed with any seismic software (SEG-Y format). Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Innomar Medium
Innomar Standard
Innomar Standard
The "Innomar medium-100" parametric sub-bottom profiler is designed for offshore applications down to 2,000m water depth. The transducer can be either mounted over-the-side or in the hull. This SBP model acquires full-waveform data (24 bit) that can be processed with any seismic software (SEG-Y format). Innomar also provides the ISE post-processing software specialized on the Innomar SBP data.
Marine Magnetometers
Marine Magnetics SeaSPY2
Specifically designed for shallow water survey work, the StarFish range offers towed, hull-mounted and OEM systems.
- Stable full-length tri-fin design
- Simple setup and operation
- Frequencies from 450kHz-1MHz, using CHIRP technology
- Up to a 200m swathe coverage
- Horizontal beam width as low as 0.3°
- Towed systems depth rated of 50m and OEM to 2000m
- Simple, intuitive operator software
Towed StarFish systems allow quick and easy, single person deployment making them ideal for survey work and Search And Rescue (SAR) applications. The innovative full-length tri-fin design provides a stable platform for improved image capture and the single tow-line cable keeps setup and operation as simple as possible.
All StarFish systems utilise CHIRP technology and are available in 450kHz for increased range and 1MHz for improved resolution.
- Frequency: 1MHz CHIRP
- Operating Range: Up to 35m (115ft) per channel
- Horizontal Beam Width: 0.3°
- Vertical Beam Width: 60°
- Transducer Angle: Tilted Down 30° from Horizontal
- Dimensions : 378mm x 97mm x 110mm
- Weight (in Air): 2.0kg
- Construction: Polyurethane Rubber
- Depth Rating: 50m
- Connector: Impulse, 5-way (MCIL-5-FS)
ine MagneraM
Specifically designed for shallow water survey work, the StarFish range offers towed, hull-mounted and OEM systems.
- Stable full-length tri-fin design
- Simple setup and operation
- Frequencies from 450kHz-1MHz, using CHIRP technology
- Up to a 200m swathe coverage
- Horizontal beam width as low as 0.3°
- Towed systems depth rated of 50m and OEM to 2000m
- Simple, intuitive operator software
Towed StarFish systems allow quick and easy, single person deployment making them ideal for survey work and Search And Rescue (SAR) applications. The innovative full-length tri-fin design provides a stable platform for improved image capture and the single tow-line cable keeps setup and operation as simple as possible.
All StarFish systems utilise CHIRP technology and are available in 450kHz for increased range and 1MHz for improved resolution.
- Frequency: 450kHz CHIRP
- Operating Range: Up to 100m (328ft) per channel
- Horizontal Beam Width: 0.8°
- Vertical Beam Width: 60°
- Transducer Angle: Tilted Down 30° from Horizontal
- Dimensions : 378mm x 97mm x 110mm
- Weight (in Air): 2.0kg
- Construction: Polyurethane Rubber
- Depth Rating: 50m
- Connector: Impulse, 5-way (MCIL-5-FS)
Marine Magnetometers
Marine Magnetics SeaSPY2
SeaSPY2 Marine Magnetometer
Plug & PlaySeaSPY2 is a reliable high sensitivity magnetometer with unmatched absolute accuracy. It’s the only mag that’s been integrated inside an AUV. It’s also the only longitudinal gradiometer on the market. Side Scan integration is also available, as are horizontal transverse gradiometers.
No matter how our sensors are oriented, successive Survey Lines match up perfectly. You’ll produce better quality magnetic maps and won’t lose what you’re looking for in mismatched Survey Lines. Heading bias is an offset in the mag data caused by changing direction with each survey line
There are no limitations with our omnidirectional Overhauser sensors. They will collect good, accurate data anywhere –they don’t have a dead zone. A magnetometer dead zone refers to a specific orientation relative to magnetic North at which the sensor is unable to take readings.
- 12 kgs (27 lbs) for the mag
- Towfish Length: 119 cm (47 in)
- Towfish Diameter: 7.6 cm (3 in)
- Range: 18,000 nT to 120,000 nT
- Absolute Sensitivity: 0.1 nT
- Sensor Sensitivity: 0.01 nT (standard), 0.02 nT (optional)
Marine Magnetics Explorer - Mini Magnetometer
Explorer is the world’s smallest and lightest high sensitivity magnetometer. It’s ideal for inshore, shallow water work, or offshore towed behind Side Scans, AUVs and ROVs.
There are no limitations with our omnidirectional Overhauser sensors. They will collect good, accurate data anywhere –they don’t have a dead zone. A magnetometer dead zone refers to a specific orientation relative to magnetic North at which the sensor is unable to take readings.
- 4.5 kgs (10 lbs) for the mag
- Towfish Length: 86 cm (33.75 in)
- Towfish Diameter: 7.6 cm (3 in)
- Range: 18,000 nT to 120,000 nT
- Absolute Sensitivity: 0.1 nT
- Sensor Sensitivity: 0.02.nT
Geometrics G-882
Geometrics G-882
Geometrics’ G-882 Marine Magnetometer is the leading marine system in the industry with 1000+ systems sold worldwide! The G-882 is the only system that meets the standards required for UXO clearance in the North Sea. This very high-resolution Cesium vapor marine magnetometer is low in cost, small in size, and offers flexibility for professional surveys in shallow or deep water. Use your personal computer with our MagLog™ software to log, display and print GPS position and magnetic field data. The system directly interfaces to all major side-scan manufacturers for tandem tow configurations. Being small and lightweight, it is easily deployed and operated by one person. Add several streamlined weight collars and the system can quickly weigh more than 100 lb. for deep-tow applications.
- Cesium Vapor High Performance: Highest detection range and high probability of detecting all sized ferrous targets.
- Streamlined Design for Tow Safety: Low probability of fouling in fishing lines or rocks. Rugged fiber-wound fiberglass housing.
- Sample at up to 20Hz: Unparalleled data density while also covering larger areas per day.
- Sensor can be Rotated for Optimal Signal: Can be used worldwide.
- Easy Portability and Handling: No winch required. Built-in easy-carry handle. Operable by a single man; only 44 lb. with 200 ft. cable.
- Internal CM-221 Mini-Counter: This little counter provides multi-sensor sync and data concatenation, allowing the user to combine multiple systems for increased coverage.
- Export Version Available: Use anywhere in the world without need for an export license (except embargoed countries). See specifications.
- 18 kgs (40 lbs) for the mag
- Towfish Length: 137 cm
- Towfish Diameter: 7.0 cm
- Range: 20,000 nT to 100,000 nT
Sidescan Sonars
Starfish 990-F CHIRP
Specifically designed for shallow water survey work, the StarFish range offers towed, hull-mounted and OEM systems.
- Stable full-length tri-fin design
- Simple setup and operation
- Frequencies from 450kHz-1MHz, using CHIRP technology
- Up to a 200m swathe coverage
- Horizontal beam width as low as 0.3°
- Towed systems depth rated of 50m and OEM to 2000m
- Simple, intuitive operator software
Towed StarFish systems allow quick and easy, single person deployment making them ideal for survey work and Search And Rescue (SAR) applications. The innovative full-length tri-fin design provides a stable platform for improved image capture and the single tow-line cable keeps setup and operation as simple as possible.
All StarFish systems utilise CHIRP technology and are available in 450kHz for increased range and 1MHz for improved resolution.
- Frequency: 1MHz CHIRP
- Operating Range: Up to 35m (115ft) per channel
- Horizontal Beam Width: 0.3°
- Vertical Beam Width: 60°
- Transducer Angle: Tilted Down 30° from Horizontal
- Dimensions : 378mm x 97mm x 110mm
- Weight (in Air): 2.0kg
- Construction: Polyurethane Rubber
- Depth Rating: 50m
- Connector: Impulse, 5-way (MCIL-5-FS)
Starfish 452-F PRO
Specifically designed for shallow water survey work, the StarFish range offers towed, hull-mounted and OEM systems.
- Stable full-length tri-fin design
- Simple setup and operation
- Frequencies from 450kHz-1MHz, using CHIRP technology
- Up to a 200m swathe coverage
- Horizontal beam width as low as 0.3°
- Towed systems depth rated of 50m and OEM to 2000m
- Simple, intuitive operator software
Towed StarFish systems allow quick and easy, single person deployment making them ideal for survey work and Search And Rescue (SAR) applications. The innovative full-length tri-fin design provides a stable platform for improved image capture and the single tow-line cable keeps setup and operation as simple as possible.
All StarFish systems utilise CHIRP technology and are available in 450kHz for increased range and 1MHz for improved resolution.
- Frequency: 450kHz CHIRP
- Operating Range: Up to 100m (328ft) per channel
- Horizontal Beam Width: 0.8°
- Vertical Beam Width: 60°
- Transducer Angle: Tilted Down 30° from Horizontal
- Dimensions : 378mm x 97mm x 110mm
- Weight (in Air): 2.0kg
- Construction: Polyurethane Rubber
- Depth Rating: 50m
- Connector: Impulse, 5-way (MCIL-5-FS)